Heat Shrink Push Connector 0,5mm²-1,5mm² Red with adhesive Type CSFSH

Wire Range: 0,5mm²-1,5mm².
AWG: 22-18.
Stud Size: 6,3mm x 0,8mm
Color: RED.
Tube Inner Diameter Expanded : 6,5mm.
Tube Inner Diameter Recovered: 1,4mm..
Packaging Unit (PU): 100 Stück in a Polybag.


Features:

The Tube is a Copolymer on base of Polyethylen and the adhesive is EVA.
RoHS compliant.
40% faster shrinkage than Polyamide
No wire damage thanks to a lower shrinkage temperature (100°C instead of 170°C for Polyamide).
Excellent fluid resistance (Trichlorethylene, Isopropanol, Gasoline, Battery Acid, Diesel Fuel, Motor Oil, Anti-Freeze, Brake Fluid, 5% Saltwater).
Very high abrasion resistance.
35 % better strain relief than Polyamide.
100 % water tightness.
Minimum shrink temperature 100°C.
Operation temperature -55°C bis 125°C.
Schrink ratio 3:1.

Physical Properties Heat Shrink Tube:

Tensile Strength (ASTM-D 2671): 27 MPa min.
Dieelectric Strength (ASTM-D 2671): 30 KV/mm.
Elongation (ASTM-D 2671): 450%.
Longitudinal Change (ASTM-D 2671): 10% max.
Specific Gravity: 0,95 cm³.
Heat Resistance (168 hrs at 165 +-5°C): No cracking, flowing or dipping of outer wall.
Heat Shock (4 hrs at 250°C, ASTM-D 2671): No cracking, flowing or dipping of outer wall.
Low Temperature Flexibility (4 hrs at -55°C, ASTM-D 2671): No cracking or splitting of outer wall.
Flammability (FMVSS 302): Passed.

Chemical Properties Heat Shrink Tube:

Fluid* Resistance (24 hrs at 23°C, ASTM-D 2671): Good to excellent.
Cupper Corrosion (ASTM-D 2671): Not corrosiv.
Water Absorbsion (ASTM-D 2671): 1% max.

Electrical Properties Heat Shrink Tube:

Dielectric Strrength (ASTM-D 2671): 30 KV/mm.


* Fluids: Trichlorethylene, Isopropanol, Gasoline, Battery Acid, Diesel Fuel, Motor Oil, Anti-Freeze, Brake Fluid, 5% Saltwater.